Jump to content
Miles-Kevin Baron

2018 NV200 Update Failed

Recommended Posts

Hi everyone,

    Added a 2018 NV200 a few months ago and LOVE it !!   I guess now I have a fleet !!!  NV2500, NV200 for the biz and I drive a 350z and the other half has an Armada.

   Anyway, my Nav/Audio system keeps trying to "update".   This is RANDOM!!  and annoying.  I can be sitting not doing anything, I can be driving, happens every couple or three days, but honestly, who knows what's happening when I'm not looking because the vehicle does NOT need to be running.   

   Basically what happens is I get the System Initialization screen, then it goes to Status: Update Failed.  Insert media, System is shutting down.   Copying 0/100.     After this, there will be a 60 second countdown. and it will reboot.   It will do this I believe 3 times before the system becomes useable.  This takes 30 to 45 minutes.

   I have been to the dealer once and they "updated" the system.  I did notice some road changes on the way home, so they did indeed at least update the MAP.   I will post a screen shot if I can of what it looks like.

Any ideas ?????
post-1051-0-16388900-1535316163_thumb.jpg
 

Share this post


Link to post
Share on other sites

Just an update, I found a Technical Service Bulletin for 2016/2017 that addresses this, but no 2018 TSB.  The 2016/2017 bulletin requires a dealer online USB stick, which I don't think applies to 2018 as there is no place to plug a USB stick in... at least not visibly.  :( 

Any assistance with this would be greatly appreciated.

Share this post


Link to post
Share on other sites

Check the date on the nav card. Most likely the card that came with your NV is a 2016/2017. Even if a 2018 card exists, the dealer is not likely to have one on hand. Looks like another trip back to the dealer for the TSB.

 

Is this TSB NV200 specific? I’d be surprised as the nav unit is car based. Have them pull a card, samedate as yours, from another new vehicle on the lot and see if it works any better. Actually, the card won’t be in the vehicle; rather, it will be in a drawer with a bunch of other cards... Just check the date. Maybe parts number as well as there are 2 versions. You should have the post 2014 card.

 

When I installed an updated card after 5 years, none of the screens appeared as described in the set up instructions. Since it didn’t say update failed I could only assume it uploaded. The only way to tell was what you noticed, road changes.

 

What warranty does the NV200 have and can any dealer work on it? You may have to push for a nav replacement, new card and unit.

Edited by radin2son

Share this post


Link to post
Share on other sites

The card doesn't seem to have a date, but it does seem to be the latest based on pictures of 2018 cards. It seems they dropped the date for 2018.

post-1051-0-60644400-1535401882_thumb.jpg

post-1051-0-43422900-1535401957_thumb.jpg

Share this post


Link to post
Share on other sites

It may be that the older version has a date.

 

I would still have the dealer try another card as well as try yours in another vehicle. This should be simple warranty work. Get the service manager involved. If that fails, get Commercial Customer Service involved. You will have to do this by phone, unless they changed the process and made it the same as car customer service.

Share this post


Link to post
Share on other sites

I have an appointment again next week. They have a guy that's supposed to be an expert on the system, but he's out until next week. I'll post if we figure it out. I like your suggestion of swapping cards. The issue is the reboot is random, so it may take a few days to know if fixed.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...