Jump to content
Dustin Anderson

Inverter overide

Recommended Posts

This does not change the wattage!  The lights on but nobody home. I run a small compressor with no issues when parked (400w)but it will not run at all when van is moving (150w). I performed the above process and tested it.  Compressor still does not run when van is in gear. Don’t bother with trying. 

Share this post


Link to post
Share on other sites
On 7/23/2020 at 1:24 PM, wags5050 said:

This does not change the wattage!  The lights on but nobody home. I run a small compressor with no issues when parked (400w)but it will not run at all when van is moving (150w). I performed the above process and tested it.  Compressor still does not run when van is in gear. Don’t bother with trying. 

at the inverter in the back, i used a splice clamp on the SMALL white wire before the harness that plugs into the inverter and grounded it and its now charging all my cordless batteries. before it would cut out and stop charging. i didn't cut the wire, just used a splice clamp and ran the wire that i clamped on to the metal bracket thats grounded.

Share this post


Link to post
Share on other sites

I did this but both lights only come on for about 45 seconds and then the 150w light goes out. Any ideas?? I grounded the wire to the metal plate right behind the panel...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...