Robert J Spanarelli Posted October 11, 2017 Does anybody know how to get to the license plate lights? Quote Share this post Link to post Share on other sites
Mark Rogers Posted October 11, 2017 Here's what the factory service manual says: WARNING:Do not touch bulb while it is lit or right after being turned off. Burning may result.CAUTION:• Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to bulb.• Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.may affect the performance of the lamp.1. Remove the back door finisher. Refer to INT-21, "Removal and Installation".2. Rotate license plate lamp socket (1) counterclockwise and remove.3. Remove license plate lamp bulb from bulb socket. The "back door finisher" is the plastic panel on the inside of the door. Fortunately, that step is pretty simple: "Release the clips, using a suitable tool, then remove the back door finisher (RH) from the back door." The owner's manual says to use a W5W bulb. 2 ASD Dad and Robert J Spanarelli reacted to this Quote Share this post Link to post Share on other sites
Robert J Spanarelli Posted October 11, 2017 Great, thanks... Quote Share this post Link to post Share on other sites
