andy_george Posted January 21, 2015 I'm putting a big auxillary light up in the hole of the front bumper. I am wiring it to a switch that turns it on/off/on with high beams. So i need to tap into the signal wire for the high beams, and ideally I'd like to find it in the cab to avoid all the salt, dirt, heat, etc. at the headlights. And i'll run that wire to a relay, etc. But i'm also afraid it's buried in the center of a 3" bundle that's wrapped, taped, and zip tied in a tiny space that no man's hands could ever fit. Does anyone have any idea where and what color the line would be in the cab? Any ideas or photos would be greatly appreciated. Thanks! -Andy Quote Share this post Link to post Share on other sites
axulsuv Posted January 23, 2015 Andy ; Go here and buy the manual for a day ... You should find all you need and be able to print out a schematic . :) http://www.nissan-techinfo.com/shopper_lookup.aspxHave fun ,Glenn Quote Share this post Link to post Share on other sites
Tatunka Posted January 24, 2015 (edited) The Body Builders Guide also has a lot of information, it doesn't have the wiring diagram but enough information to be able to trace it back. Also don't forget, the NV is prewired for AUX lighting into the cab. The I would just splice into the harness, solder the connections, and cover with shrink wrap to weatherproof the wiring, but that just my opinion. Edited January 24, 2015 by Tatunka Quote Share this post Link to post Share on other sites