nihil_perditi Posted November 29, 2016 Some other updates (__of __): Hardest part of seat swivel install was waiting for it to arrive. If I recall correctly, I waited around 6 months for product to be in stock. Not many are made due to relatively lower demand compared to a similar swivel for a sprinter. Very happy with quality and extra space it provides. 1 Chris Dempsey reacted to this Quote Share this post Link to post Share on other sites
radin2son Posted December 5, 2016 As long as you can find space for a larger fridge, it is a good choice. Fewer stops for groceries, plus many rural areas are food deserts. Great work. Two things missing in these build threads are smoke and carbonmonoxide detectors. We have both. The smoke detector can be annoying when cooking but we know it works. Do you need these? I know of at least one camper van, not ours, that caught fire while the occupants were asleep. The detector prevented injuries and major damage. 2 andy_george and wollip reacted to this Quote Share this post Link to post Share on other sites
nihil_perditi Posted January 21, 2017 Finally working on electrical - hope to have solar panels (560W) mounted soon. Here is a photo of 200 Ah Li-ion battery connected to charge controller/ BMS: Quote Share this post Link to post Share on other sites
nihil_perditi Posted January 21, 2017 Using 80/20 aluminum to create a rack to mount the solar panels to. Pieces of cardboard are dimensions of actual panels - hope to have the front one pivot up when parked for ventilation & possibly a little extra charge but we will see. 1 wollip reacted to this Quote Share this post Link to post Share on other sites
nihil_perditi Posted February 8, 2017 560 Watts installed with pivoting panel over the pilot hatch. With the pilot hatch almost completely covered (as pictured) a nice amount of indirect sunlight gets in without that much heat. Unfortunately my fridge has what is most likely a coolant leaking problem so that is not up and running yet (Waiting to hear back from manufacturer). I will now focus on installing a rack on the driver's side of the van to mount surfboards to. The rack will consist of 80/20 aluminum and will connect to the 80/20 roof rack already installed. Wish me luck! 4 radin2son, trarob, ASD Dad and 1 other reacted to this Quote Share this post Link to post Share on other sites
breeze Posted February 12, 2017 (edited) Nice build going. Keep up the good work! Edited February 12, 2017 by breeze 1 nihil_perditi reacted to this Quote Share this post Link to post Share on other sites
nihil_perditi Posted March 11, 2017 Surfboard rack up now. This has been on van for a few weeks now and is working well. I will add a "stabilizer" arm or two of aluminum that will come off the bottom and wrap down under to the chassis in the future for extra security. I figured I could add some rivnuts to the body for stabilization but I am giving myself time to think about which approach I will take. Now I am planning the sink module so I can have running water! It will probably take me some time (months) before I have anything I can share with regards to the sink. :headspin: 2 radin2son and ASD Dad reacted to this Quote Share this post Link to post Share on other sites
radin2son Posted March 11, 2017 Looks like you are ready to surf, just add ice. 1 nihil_perditi reacted to this Quote Share this post Link to post Share on other sites
nihil_perditi Posted June 4, 2017 Sink module is coming together finally! I have focused on sink and drainage as the first phase of the installation and will install the faucet and associated components (water pump, fresh water container) during the second phase. Not pictured is a hepvo waterless p-trap that will utlimately drain to a 2.5 gallon grey water jug. I will take more photos but wanted to share pictures showing how the sink will be able to move fore & aft. Might sound a little crazy to have a sink that moves but I think it will work! The primary advantage of having it move is less floor space permanently occupied by its length and width dimensions. 1 radin2son reacted to this Quote Share this post Link to post Share on other sites
radin2son Posted June 4, 2017 Nothing you do surprises us. Never would have thought of a moveable sink. Over a mattress? Must be the salt air... Will you use the cabinet space underneath for your gray water? 1 nihil_perditi reacted to this Quote Share this post Link to post Share on other sites
nihil_perditi Posted June 4, 2017 Radin2son - I think I can best answer that question with a few photos once I have grey water tank and other components installed. Quote Share this post Link to post Share on other sites
radin2son Posted June 4, 2017 Keep up the good work. It keeps us appreciative of new ideas... One thing SMB did was to cover up/box most of the step considering most entry is via the grab handle. It increases floor space and adds a spot for storage. In our case, dog leashes. Another SMB uses it to store bottled water; easy access when standing outside the van. 1 nihil_perditi reacted to this Quote Share this post Link to post Share on other sites
TanStewie Posted June 5, 2017 Ive never heard of that 80/20 aluminum stuff what a great idea. Looks like it's coming along nicely. I like your solar set up, adding solar to my van will probably be my next endeavor. 1 nihil_perditi reacted to this Quote Share this post Link to post Share on other sites
nihil_perditi Posted June 5, 2017 Radin2son - agreed - I am thinking of building a cubby on the portion of the step that is not really used for shoe storage. TanStewie - thanks! If you have any questions about 80/20 I am happy to help. There is also some great info on working with it on the sprinter forum. Quote Share this post Link to post Share on other sites
nihil_perditi Posted June 6, 2017 Most of the paneling installed now. It is a pretty rigid piece of expanded pvc material (I think that is what it is called) that I saved from packaging material for the floor when it was shipped to me. I can always replace it with something else down the line but I am happy with how it turned out. For the front of the lower cabinet I will either have a piece of fabric as the "door/covering" or a regular type door that swings open, still thinking about it. Also pictured is the hepvo waterless p-trap. 3 radin2son, ASD Dad and TanStewie reacted to this Quote Share this post Link to post Share on other sites
TanStewie Posted June 6, 2017 That hepvo water-less P trap looks like a great alternative to the standard P trap. I used the traditional P-trap on mine and it wastes a ton of space under the sink. 1 nihil_perditi reacted to this Quote Share this post Link to post Share on other sites
nihil_perditi Posted June 24, 2017 Faucet installed - now onto water pump & fresh water tank. 1 radin2son reacted to this Quote Share this post Link to post Share on other sites
radin2son Posted June 24, 2017 One advantage you have is being able to use it for an exterior shower (?) without having to hang a flexible hose on something. I would add a minimal back splash to the sink or cutting board/counter to keep things from escaping off and out the door. 1 nihil_perditi reacted to this Quote Share this post Link to post Share on other sites
nihil_perditi Posted June 26, 2017 Radin2son - yes given the way the faucet articulates I think I can swing it out for a shower which is a nice added bonus. Thanks for the backsplash idea - I will add that to the list of finishing touches I am going to work on once I near completion of the build. 1 radin2son reacted to this Quote Share this post Link to post Share on other sites