Idealer Posted December 30, 2017 Please, any suggestions for Stainless Steel Bolt-On Exhaust tips?have tried a couple of 2-1/2" that did not quite fit without cracking or breaking. Quote Share this post Link to post Share on other sites
Randucci Posted January 1, 2018 The NV exhaust O.D. at the tail pipe is a metric size and normal inch tips don't fit well. I wanted something different and some ground clearance, so I used a NASCAR oval zoom tip. I had it black powder coated because they come in bare steel and it fit the look of my van. Not cheap, but it is the look I wanted. 3 ASD Dad, RaisingRices and andy_george reacted to this Quote Share this post Link to post Share on other sites
andy_george Posted January 2, 2018 I put a 2.5” Flowmaster tip on a few years ago. Looks good and is holding up well, but as Idealer stated, I had to use a cut-off wheel to cut a slit in the stock exhaust pipe so the tip would slide on it. Quote Share this post Link to post Share on other sites
chphilo Posted January 2, 2018 I am not sure about the quality, but Walmart sells some tips. You may want to try one and see how it looks. They have pretty generous return policy if you don't like it. I thought about putting an exhaust tip, but I thought stainless tip would stick out too much from the rest of the pipe on a black van. After about a year, the stock pipe was beginning to look bad, making the van look older. I just got some high temp black paint and applied to the pipe. Quote Share this post Link to post Share on other sites
Idealer Posted January 2, 2018 Thanks everyone for the response Quote Share this post Link to post Share on other sites