chris_columbia Posted April 10, 2019 (edited) Not sure if anyone has done this before(I couldn't find a thread mentioning it), but I really like leather steering wheels, and it just so happens that the NV3500 passenger van commonly has one, but the cargo models don't. They are 100% interchangeable. You just reuse the airbag, as it fits perfectly in the leather wheel. Pulling the steering wheel off the splines was a pain and required a lot of force on the steering wheel removal tool(or plate with three screws, which I used). Picture of my new wheel attached! $128 factory new on ebay. Edited April 10, 2019 by chris_columbia 3 Mark Rogers, andy_george and Chris J. Dempsey reacted to this Quote Share this post Link to post Share on other sites
Simon & B Posted April 10, 2019 https://www.amazon.com/gp/product/B01F6S8YOY/ might have saved a little effort, time and money? 1 Mark Rogers reacted to this Quote Share this post Link to post Share on other sites
Chris J. Dempsey Posted April 10, 2019 Looks great. My 2014 Hi-top’s wheel is wearing poorly and I may want to do this. Do you have any in-process pics? Thanks. Quote Share this post Link to post Share on other sites
chris_columbia Posted April 11, 2019 No "in process" pics. Basic instructions are:1. Use a 10mm wrench with extension to get to the bolt on either side of the steering wheel that holds the airbag on. 2 bolts.2. Pull airbag off, and disconnect the yellow and orange airbag connectors. You have to pull the black tab up first using a small screwdriver than the connector detaches.3. Disconnect the CC and radio harness if equipped.4. remove steering wheel nut. I think it was 19mm. You'll need a long handle extension or "breaker bar".5. Use a steering wheel removal tool to pull steering wheel off splines.6. Install in reverse order. 3 Mark Rogers, ASD Dad and andy_george reacted to this Quote Share this post Link to post Share on other sites
