Eric Posted May 6, 2012 After a drive, the rear door did not unlatch. I took the access panel off and found the cable mechanism unseated from the pull mechanism. There is a plastic clip that holds the cable in place and the cable dislodged from the clip. The clip needs to have the open face facing the handle or the cable or will fall out again. Mine was installed at the factory backwards. Bad design because a factory assembler can put it in backwards without realizing it. EASY FIX Hurrah! Quote Share this post Link to post Share on other sites
Redshirt Posted May 6, 2012 Glad it was an easy fix. When mine arrived I found the overhead storage bin had the the two outside screws so tight it cracked the mounting holes. They could use more quality control. I saw the problem on mine immediately. It should have never left that way. Quote Share this post Link to post Share on other sites
