Jump to content

DECOCW

NV Member
  • Content Count

    26
  • Joined

  • Last visited

Everything posted by DECOCW

  1. Does any one know the Transmission oil capacity for the NV 1500?
  2. DECOCW

    close up

    Seems to be happening where the welds are. Mine had something similar at the back fixed it with some primer. Yours looks more severe. Fix it before it gets worse. Bad craftsmanship from Nissan. Bobby
  3. NV 4.0 engine 2012. Did any one experienced vibration at highway speeds that seems to come unexpectedly for a few moments and then go away? Road condition seems to be irrelevant. Can happen on a long highway trip once and never to re appear until the next one. Very strange situation, not sure what to make of it. My first thought is wheel balance, but why does it go away and reappear later? Any help on this it greatly appreciated. Thanks Bobby
  4. The Navication was working okay before, it just wasnt giving me the over the speed limit warning. Other than that i did not notice any difference. I did not try to input any data in the Nav while i was driving so i dont know the answer to that. Bobby
  5. The vss wire is the PINK ( pinout number 18 next to the black ) wire on the existing car harness. Tested and working on my Nav system. Good luck with yours. Bobby
  6. Update. I have found the vss wire for anyone who is is interested in replacing their stereo. It is the pink wire on the existing car stereo harness. Bobby
  7. Hi Dennis, any luck with the vss wire? I am replacing my stock radio too with JVC kw-nt300. Stock radio has speed button control so it has to be by the harness. Question is witch color. Thanks. Bobby
  8. Any one knows what color is the vss ( Vehicle speed sensor) wire on the stock radio wiring harness? I know its there because i see a speed sensitive volume button. I am changing the stock radio with an in dash navigation system from JVC that requires a vss connection. Thanks i appreciate any input. Bobby
  9. Mine was making noice when cold wheather. I have fixed it my self. There are two centering pins, one at the top and one at the bottom not the one in the middle that locks the door. The one at the bottom of mine was not centered and it was rubing metal to metal. Renoved the screws and centerd it. I hope this helps. Bobby.
  10. Okay thanks Blaine, i will take it for alignment and get them to do 0.20 or may be 0.15 see if this does anything. No, i don't do any hard cornering. Bobby
  11. Check out the pictures i have posted. The side panels come with the SV and i think the 2500. The top i did with 1/8 inch plywood, you can use 1/4 but it will be more work to cut. There is fiberglass insulation behind it. You can make a cardon template before you cut the panels . Bobby.
  12. You can buy an off the market hitch for $150 and aftermarket wiring harness for about $60 and install it yourself .I did mine ,it takes a few hours .Parts are avelable on the internet . The dealer will charge you atleast $600 to $800 .
  13. I am geting 16.5 mpg average ,driving mostly empty .Its a 1500 sv low roof v6 . Bobby .
  14. I paid $28,800 for my 1500 sv low roof not counting Taxes .Includes rear windows ,side pass and driver windows and a rear aftermarket seat .I am in NY City and i have passenger plates .
  15. I get 16.5 average with my 1500 sv low roof .Do you have v8 ? Mine is v6 . Bobby .
  16. I drove my 1500 sv cargo low roof in a bad snow storm last winter .It hadled very well , better than my previus Chevy Express Van .Not sure i like the red ,i have the silver and it is easy to keep clean .I hope this helps . Bobby .
  17. Thanks for you replies Guys .The front preusure was 80 psi on mine to, but i have corrected that early .I am suspecting to much front toe in also .Dealer wont touch the alignment because is within specs .I have a printout from an indepented shop that i whent befeore i go to the dealer .It specifies for 0.22 to 0.28 ,the actual is 0.26 left and 0.27 right .Do you thing is to exesive ? Yes 10 days, but that is because i didnt need it for a few days .I thought they would do a better job that way .I have rotated the tires already . Bobby .
  18. Yes i have noticed it to .Feels like some plastic part of the cover touches another ,not sure what to make of it .Try changing the tilt position see if this changes anything .Mine seems to get better in a referent position . Bobby .
  19. Mine was the same way there are some screws at the front and at the inside with some brackets you can loosen those and adjust .The dealers are full of crab just do it your self .I took mine in for uneven wear at the outside front tires at 5,000 miles ( Saw tooth wear ) and they couldn't find anything wrong .What a waist of time . Bobby .
  20. Mine gets 16.5 average mpg .V6 1500 runs mostly empty . Bobby
  21. Mine developed saw tooth wear at the front tires at 5,000 miles Alignment is okay dont now the problem yet .Have to take it to Dealer .I am happy with everything else ,so far so good . Bobby .
×
×
  • Create New...