Jump to content

TM3

NV Member
  • Content Count

    34
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by TM3

  1. TM3

    Final cut

    From the album: TM3 VanLife

    Black top-carpet will keep the original carpet clean for some time. I can always reinstall a new cut when this top-carpet wears out.
  2. TM3

    Rear floor panel

    From the album: TM3 VanLife

    Took of the most rear floor panel, pulled the carpet, tucked it under the panel and reinstalled the panels.
  3. From the album: TM3 VanLife

    Unscrewed the heater vents, cut the carpet just clear of it and screwed the vents back on. It helped as an anchor also.
  4. From the album: TM3 VanLife

    Also needed to remove the floor panel by the door to tuck the side of the carpet in. Fairly easy...well you don't need to remove it but it isn't hard (with the panel removal tool).
  5. TM3

    Panel removal tool

    From the album: TM3 VanLife

    Used the tool to remove those cover tops on the front floor panel, then unbolted the panel. From there we tucked the carpet under it and reinstalled the panel to anchor it as we tightened/pulled towards the rear.
  6. From the album: TM3 VanLife

    Only tool I didnt have, which I had to purchase, was the panel removal kit. It was less than $20.
  7. TM3

    Carpets first cut.

    From the album: TM3 VanLife

    Purchased carpet and cut it to fit the van.
  8. We are a family of 5 with a dog. We've owned the 2017 NV3500 for a month now. We like to travel and are nearing 3K miles on the van. Hands down better than the five family vehicles I've previously owned. I was going to buy a NV2500 in 2014 but my wife told me to get the Armada
  9. TM3

    Sub

    Did/do you have problems with your sub being there? I had mine installed in the same spot and I am wondering if it is a bad install or bad location. Thank you in advance.
×
×
  • Create New...