tjash

They were installed by Advanced 4x4 in Salt Lake City. Not sure if they’re from Aluminess (the rack is) or a local supplier, but I bet they’d work with you. Ken Garff Nissan in SLC may also know the source.

Tell you what - pay upfront and I’ll roll them down the hill to you. Should get there in a month or two! ? If you find yourself making a roadtrip out East, give me a shout. Doesn’t seem to be too many people looking for 8x165.1 wheels, so I’ll likely still have them.

For what it’s worth - Method NVs, 18x9, 20mm offset wrapped with General Grabber ATXs, 265/70R18. 3” lift. Good clearance, no door rub (about 1/2” to spare). I added the black bolt kit; NVs come standard with the zinc lip bolts.

A little dusty from the trip and recent weather, but she’s home and happy in Maine!

$600 - For sale - set of 4 stock 17” chrome wheels and center caps, 8x165.1 bolt pattern. 4 Firestone Transforce HT 245/70R17 tires with 2900 miles on them. TPMS sensors removed. Drove it from Utah back home to Maine and swapped out the wheels and tires. Located near Portland, ME.

Yeah, if you’re careful you could make that work. Maybe even cut them a little large and use some Velcro tape to make a lip on the underside of the mat to mate up with some around the border of the cut out piece.

We picked up the van a couple weeks ago and I just started putting in the mats this week. More of a pain trimming the holes for the seats than I anticipated, but they do fit and provide really good coverage. One thing I don’t like is that there’s a lip between the three pieces, so you don’t end up with a seamless look. Makes sense for folks only installing the second or second and third rows (for retaining spills and debris), but it doesn’t give it a totally clean look. I also would have liked an option to have the holes pre-cut from the factory, as my trimming skills topped out in second grade. If I had it to do again, I’d go more slowly and make a template. Another drawback is that the OEM covers for unused seat anchors no longer fit, so if you’re running a seating arrangement with seats removed, you’re left with some unsightly openings and dirt traps. (Anyone have an alternative to the Nissan floor plates?) Overall, quality and coverage is good, and it’s about the only option out there unless you go completely custom. I’ll try to post some pics in the near future.

Just got back from the tire shop where I found out that my Motiv Offroad Glocks (18x9, 18mm offset) are too thick at the mounting pad to work. The tech was only able to get 4-5 threads engaged. Found one similar post in the forum that solved the issue by using extended shank lugs, but I’d rather not swap out the lugs. Anyone have recommendations on a black wheel, 18x9 with 18 or 20mm offset that they installed with no stud length or thread engagement concerns?

I did order the weathertech mats for the rear and cargo areas. Picking up the van from Advanced in a couple of weeks and will let you know how they fit.

Just ordered General Grabber ATXs, 265/70R18 from a local shop and Motiv Glock wheels, 18x9, 18mm offset from Mr. Wheel Deals. Will post how they fit and look once they’re on.

Looks sharp! I like the blacked out look with the white paint job. What’s that wheel/tire combo? Lifted?

Thanks for the lead! I’ll go poke around and find it. I liked the package from Ken Garff and Advanced a little better, including some of the options they offered. Spendy, but by the time I pieced it all together on my own, I figured it was worth the one-stop shopping. I’ve spent a lot of time out west, but haven’t driven cross country in 20 years. Last time it was with a mountain bike on the back of a Wrangler, so this should be an interesting take! Looking forward to it, but I haven’t decided on taking the northern route or dipping more to the south yet.

Waffling on the tire choice now - considering the Yokohama Geolander GT015s for a better road ride and longer life, at a lower price. Also, thought I was in the clear with 275/70R18s and an 18mm offset, but it seems like some people have had rubbing issues. When I was first on here, I saw a pic of a shimmed door using some stainless washers. Can’t seem to find that now - can anyone point me to it (or other shimming pics/descriptions)? Searched for a while and just came up with casual mentions.

Thanks crusty. I figured they weren’t updating the marketing info after the NVP was discontinued. The video I was referring to was from a family with an NVP, not weathertech itself though. Not sure if I can link it, but if anyone’s interested, just search Legacy Outdoor Family Adventures, Tank gets an upgrade.

We just ordered a 2021 NVP SL and I’m looking for some all weather mats to cover EVERYthing. Up front, all rows in the back and the cargo area. Saw a video highlighting Weathertech’s mats for 2019, but their site doesn’t show anything for 2021. Does anyone know: 1. Will the 2019s fit a 2021? Any changes to the floor pan since 2019? Or, 2. Any other all weather mats out there to cover everything for a 2021? I've searched here and tried my best Google-fu, but I’m coming up empty. Sent an inquiry to the dealer and Weathertech. Will post any new info I come across.